Keysight Technologies 855**A Series, Руководство пользователя и сервисное руководство, Страница: 23 / 52

User’s Guide 85523-90005 1-17
855xxA/B Series CalPods and 85523B CalPod Controller Usage Information
•
If Test Result shows "Failed" and the window text contains the words “Controller @ .... :Failed”
— Check that the CalPod Controller is powered on and connected to the PNA correctly. See
“Step 5. Connect the LAN Cable” on page 1-13 .
— If all connections appear to be correct and the USB 2.0 to LAN Adapter is being used, set a
static IP address on the PNA. See "Setting a Static IP Address on the PNA (When Using USB
2.0 to LAN Adapter)" on page 2-3 .
•
If Test Result shows "Failed" and the window text contains the words “sn .... :Failed,” check that
the CalPod is properly connected to the CalPod Controller.
Clicking
Help
in the dialog window displays CalPod information in the PNA
Series Network Analyzer Help System, stored in the PNA.
As indicated in the example above, CalPod serial number 00011447 has been assigned
to PNA test Port 1.
2 . After each CalPod has been assigned to a test port on the PNA, click Close.
•
If the Test Result dialog window shows “Passed,” the CalPod is functioning. The temperature
displayed is the internal temperature of the CalPod microcircuit.
7.8 After each CalPod serial number has been highlighted and tested, click Close to return to
the “Calibration Refresh Module Configuration” dialog menu.
7.9 Assign each CalPod to a PNA test port.
1 . In the “Calibration Refresh Module Configuration” dialog window shown below, under
the heading “Assignment of CalPods to VNA Ports,” assign a CalPod to each test port
on the PNA. Note that Port 1, Port 2, Port 3, and Port 4 refer to the PNA test ports,
and not the connector labels on the 85523B CalPod controller.