
User’s Guide 85523-90005
1-13
855xxA/B Series CalPods and 85523B CalPod Controller
Usage Information
Step 5. Connect the LAN Cable
A LAN cable is required
,
but is not included. Either a standard or cross-over LAN
cable can be used. (A cross-over LAN cable is used to connect computing devices
together directly where they would normally be connected via a network switch,
hub, or router.)
•
The following graphic shows the recommended configuration for the LAN cable. Information
on an alternative configuration can be found at
“Alternative Configuration for the LAN Cable
(Not Recommended)” on page 2-4
. Although this alternative is not recommended, it can be
used when the USB 2.0 to LAN adapter is not available.
•
85523B CalPod Controllers do not support DHCP networking.
•
The 85523B CalPod Controller is set to a static IP Address (default: 192.168.0.100.)
•
For additional information on making connections to the LAN using network switches and
network hubs, contact your network administrator.
5.1 As shown in the graphic above, connect a LAN cable (not included) to the rear of the 85523B
CalPod Controller and connect the other end to the USB 2.0 to LAN adapter (part number
0960-2955).
5.2 As shown in the graphic above, connect the USB 2.0 to LAN adapter to a USB port on the PNA.
(Typically this is on the rear of the PNA, but any USB port can be used.)
5.3 Verify that AC line cords are connected to both the PNA and CalPod Controller and that they
are powered on.
Содержание 855**A Series
