Keysight Technologies 85053B Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 58

background image

3-14 85053B

Use, Maintenance, and Care of the Devices
Gaging Connectors

3-

Figure 3-4

Assembling the Airline and Center Conductor

5.

Attach the short:

a.

Without turning the airline or the short, connect the airline to the

short by interconnecting the male and female connectors. Connect

the nut finger tight. Do not overtighten.

b.

Using an open-end wrench to keep the device body from rotating,

use the torque wrench recommended for use with this kit to tighten

the connecting nut to the specified torque. Refer to

Connection Using a Torque Wrench” on page 17

for additional

information.

c.

Remove the protective end cap from the male end of the airline.

d.

Carefully press the male end of the center conductor lightly against

a firm flat object to seat the center conductor into the short.

6.

Gage the airline (refer to

a.

While holding the gage by the barrel, and without turning the gage

or the airline, connect the gage to the airline by interconnecting the

male and female connectors. Connect the nut finger tight. Do not

overtighten.

b.

Using an open-end wrench to keep the device body from rotating,

use the torque wrench recommended for use with this kit to tighten

the connecting nut to the specified torque. Refer to

Connection Using a Torque Wrench” on page 17

for additional

information.

c.

Gently tap the barrel of the gage with your finger to settle the gage

reading.

Do not allow either the center or outer conductor of the airline to come in

contact with a metal or harder surface. The soft gold plating can be

displaced, changing the pin depth and thus the performance of the airline.

«
...
28
29
30
31
32
...
»

Содержание 85053B



























































Отзывы:

Нет отзывов

Похожие инструкции для 85053B

Бренд: Landoll Страницы: 6

Бренд: ParaBody Страницы: 9

Бренд: ParaBody Страницы: 3

Бренд: MacDon Страницы: 45

Бренд: H&S Страницы: 30

Бренд: FJC Страницы: 2

BODY ARMOR PRO TERM

Бренд: Darco Страницы: 6

Бренд: TC Electronic Страницы: 4

Бренд: TC Electronic Страницы: 6

Бренд: TC-Helicon Страницы: 12

Бренд: TC Electronic Страницы: 76

Бренд: Ultraflex Страницы: 48

Бренд: Teac Страницы: 44

Бренд: Te Pari Страницы: 6

Бренд: U-Line Страницы: 9

Green Machine H-3518

Бренд: U-Line Страницы: 3

Бренд: B. Braun Страницы: 40

Бренд: B. Braun Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды