Keysight Technologies 16192A, Руководство по эксплуатации и обслуживанию

Страница: 25 / 45

3
Operation
Introduction
This chapter describes how to use the test xture and the measurement error correcting
techniques for the test xture .
Operating Flow
Before performing a measurement, you have to compensate for the residual error of the test
xture by using the measurement error correcting functions . P erform the following steps when
measuring the DUT:
The 16192A has inherent stray capacitance , residual inductance , and residual resistance that aect the
measurement. T o compensate for these residuals and thus minimize their eect on measurement accuracy , the
measurement instrument's OPEN and SHORT compensation capabilities must be used.
( 7 indicates procedures in the following pages .)
Described in Chapter 2.
The 16192A's electrical length is 11 mm (typical value).
T o set the electrical length, see your analyzer's Operation Manual.
T o set the xture and devices for xture compensation, see:
7 \How to set the SHORT condition, and the OPEN condition "
These procedures show how to set the test xture for the
OPEN/SHORT/LO AD compensation procedure .
F or how to measure OPEN/SHORT/LO AD , see the Operation Manual
supplied with your analyzer . (Y ou can omit LO AD compensation.)
T o connect the DUT , see:
7 \How to connect the DUT"
3
The compensating functions are dierent for each instrument. See T able 2-2 and perform the listed functions .
Operation 3-1