background image

17

TROUBLESHOOTING

‘NO TRANSPONDER DETECTED’ – displayed when READING

Make sure transponder key is fully inserted into the cloning tool reader and that the key has a 
transponder value. Also, if it is a newer vehicle, it may be a chip type that is not able to be read 
(and therefore cloned) yet.

‘BLANK TK60/TK100’

This message occurs in step 3 if step 2 is not completed correctly (vehicle ignition procedure). 
Start the cloning process again from step 1 and confirm the vehicle ignition procedure is being 
completed correctly. In addition, cycle the vehicle ignition an additional 3 times (for a total of 8) 
to make sure you are getting the information from the immobilizer onto the key.

‘STEP 2 WRONG’ 

This message occurs in step 3 if step 2 is not completed correctly (vehicle ignition procedure). 
Start the cloning process again from step 1 and confirm the vehicle ignition procedure is being 
completed correctly. In addition, cycle the vehicle ignition an additional 3 times (for a total of 8) 
to make sure you are getting the information from the immobilizer onto the key.

‘ERROR XX’ 

This message occurs when there is an error in the calculation. Start again from Step 1.

‘ERROR 62’ 

This message occurs when the secret key found at the end of the calculation does not match 
the original key. Start again from Step 1.

‘ERROR 63’ 

This message occurs when the ID of the original key at the end of the calculation is different 
from the one expected. Start again from Step 1.

‘MY CLONING TOOL READS THE CHIP, BUT SAYS CANNOT DUPLICATE’ 

This message occurs when it is a chip type that can be read (i.e. Texas Instruments 80-bit 
encrypted code), but is not able to be cloned. 

‘HOW CAN I TELL WHAT SOFTWARE VERSION I HAVE ON MY CLONING TOOL’ 

Turn the 884 Ultegra off and then back on. After the Keyline logo, the software release number 
will display.

For additional information, visit our website at www.keyline-usa.com, e-mail support@keyline-
usa.com or 800-891-2118 for technical support. 

©2017 Keyline USA. All Rights Reserved.

Содержание 884 DECRYPTOR ULTEGRA



















Отзывы: