Using the Terminal
K78-205 User Guide 13
3.
Holding the paper roll with the other hand, place the paper roll
in the holder using the locator clips to hold it in place.
The paper roll should be positioned as indicated by the white
label on the bottom of the paper roll holder. The loose paper end
should come from the bottom of the roll, and rest on top of the
serrated edge on the main unit.
4.
Replace the paper roll cover in its original position. The cover
must be properly closed for the printer to operate successfully.
Note: Depending on the size of the printer paper, an adjustment of the
locator clips may be necessary. If this is the case, ensure that they are
adjusted before placing the paper roll in the paper holder.
To accommodate the smaller printer paper size, adjust the locator clips
so that they are sitting in the “down” position, and for the larger printer
paper size, adjust the locator clips so that they are sitting in the “up”
position. The paper roll cover must also be changed according to the
size of printer paper used.
