18 HX3 Drawbar Expander
Voice Pedal
For the bass pedal an ADSR envelope is effective in every gating mode.
PedalDB 16
… PedalDB 8
– Drawbar settings for pedal
PedalDB 16H
… PedalDB 8H
– Drawbar settings for pedal, brighter
Pedal Attack
– affects rise time of pedal envelope.
Pedal Decay
– affects decay time of pedal envelope.
Pedal Sustain
– affects sustain level of pedal envelope.
Pedal Release
– affects release time of pedal envelope (often called string bass “sustain”
on other organs).
Pedal Harmonc
– sets harmonic breakup of individual harmonics over time. Set to lower
values to obtain a
„picked bass“ effect.
For the pedal the same choice of General MIDI instruments is available as for the upper and lower
manuals.
Audio Setup
If you switch to the submenu from the main menu items
Master Volume, TubeAmp Gain
or
TubeAmpBypass
, you will end up with the equalizer settings. For the mids a parametric EQ is
available, the bandwidth (Q) and the frequency are adjustable. With
Extended License
these
parameters are also adjustable for Bass and Treble when
Parametr B/T
is ON. More settings:
Upper Lvl Adj
– allows separate upper manual default level setting.
Lower Lvl Adj
– allows separate lower manual default level setting.
Pedal Lvl Adj
– allows separate pedal default level setting.
UprDryLvl Adj
– allows separate upper manual default level setting of dry organ signal
(without vibrato and phasing rotor).
Organ Sum Lvl
– allows organ generator default level setting.
GM Synth Lvl
– allows GM synthesizer default level setting.
SeparatePedal
– lets the bass pedal signal bypass the 122 amp and rotary simulation.
AO28 Tone Pot
–Tone potentiometer setting on preamp.
AO28 Gain Cap
– Overall gain of AO28 preamp.
AO28 MinSwell
– Minimum volume of swell pedal in heel position.
AO28 Tube Age
– Age of the preamp tubes. The older, the more clearly the triode
distortion becomes audible.
Rotary Setup
(see overview)
