HX3 Drawbar Expander 17
In addition to the organ sounds, General MIDI (GM) instruments are available, which can sound as
a layer at the same time. To activate a GM instrument, adjust its volume level as desired. To
disable the organ, set all drawbars to zero.
With the
Extended License
, another sound layer can be used. This may be detuned to achieve
even more sound effects.
UpperGM Prg 1
– Selection of GM instrument by program number
UpperGM Lvl 1
– Level setting of GM voice
UpperGM Hrm 1
– Harmonic transposition of GM voice
UpperGM Prg 2
– Selection of second GM instrument (overlay)
UpperGM Lvl 2
– Level setting of second GM voice
UpperGM Hrm 2
– Harmonic transposition of second GM voice
UpperGM Detn2
– Detuning of second GM voice
Voice Lower
The keying mode setting (mechanical or electronic keying) also applies to the lower manual. In
H100 mode
and
EnvelopeGen mode
you have three additional mixture drawbars. Additionally, in
EnvelopeGen mode
the ADSR settings are available for the lower manual.
LowerDB 16
…
LowerDB 1
– Drawbar settings for lower manual
H
E
LowerDB Mix1
…
LowerDB Mix3
– Mixtur drawbar settings for lower manual. Each
mixture consists of up to three higher harmonics at individual levels. Please note: unlike the
original H100, HX3.5 provides three mixes instead of two.
E
Lower Attack
– affects rise time of lower manual envelope.
E
Lower Decay
– affects decay time of lower manual envelope.
E
Lower Sustain
– affects sustain level of lower manual envelope.
E
Lower Release
– affects release time of lower manual envelope.
E
Lower ADSR Hrm
– sets harmonic breakup of individual harmonics over time.
H
E
EnvEna
16‘…EnvEna Mixt 3‘
– select harmonics to which the ADSR enevelope is to
be applied. Each
“o”-symbol represents a harmonic from 16’ up to Mixture 3. The selected
harmonic that may be activated by turning the encoder is underlined. If activated the
respective
“o”-symbol is filled white..
For the lower manual the same choice of General MIDI instruments is available as for the upper
manual.
