Keyautomation 900SC-200CS, Инструкция по эксплуатации

Страница: 15 / 64

15
ENGLISH
OVERALL VIEW
1 Reduction gear
2 Flashing device
3 Antenna
4 Key selector
5 Photocell
6 Bollard
7 Ratchet
8 Limit device
9 Warning notice
10 Check stop
10
1
4
7
8 6
3
2
9
5
6
10
8
5
5
PRELIMINARY CHECKS
Before starting installation it is recommended to carry out the following checks and operations:
1_The structure of the gate must be solid and appropriate.
2_During the run, the gate must not present excessive side disbandment.
3_The lower wheels/rail and the higher roller/guide systems must work without excessive friction.
4_To avoid the disbandment of the gate the sliding gate limit devices, both in aperture and in closu-
re, and a second higher roller/guide must be installed in compliance with current regulations.
5_In pre-existing gates remove any manual lock.
6_Lay the ducts for the energy supply (Ø25-50mm) and for the outside connection (photocell,
flashing device, key selector, etc.) to the base of the gate.