background image

CORDLESS DRIVER DRILL

(Li-ion Battery)

www.keyang.com

DD-1442L-2

To reduce the risk of injury, 
user must read instruction
manual

2010.07

823-2 Wonsi-dong, Danwon-gu, Ansan-shi, Kyonggi-do, KOREA
Tel : Int+82-31-490-3000  Fax : Int+82-31-490-3019

Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about recycling
of this product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.

ORIGINAL INSTRUCTION MANUAL

EN

Содержание DD-1441L-2S











Отзывы: