Key West Boats boats, Инструкция по эксплуатации и техническому обслуживанию

Страница: 45 / 48

defects in material or workmanship and notify Manufacturer or the authorized selling
dealer of same. During the warranty period, warranty repairs will be made without
charge by the authorized selling dealer, at the dealers store or service facility, or, at
Manufacturer’s election, by Manufacturer at its facility in Ridgeville, S.C.
Transportation to and from Manufacturer’s factory or to the dealer or service facility,
shall be at the buyer’s expense.
The obligation of Key West Boats, Inc., under this warranty shall be limited to the
repair or replacement of any part
WHICH IS JUDGED DEFECTIVE BY KEY
WEST BOATS, INC. Key West Boats, Inc. will not be liable for haulout, launch,
towing or storage charges, inconvience or loss of time or income or any other special
or consequential damages of any kind. Buyer must validate this warranty by
completing and returning the boat registration card within fifteen (15) days after
original purchase. The failure of Buyer to completely fill out and return the boat
registration card may make it impossible for Key West to give required notice to
Buyer in the event any defect is discovered “which create a substantial risk of
personal injury to the public” or any non-compliance by manufacturer.
This warranty may be transferred to second owner for any remaining warranty term.
Such a transfer
REQUIRES second owner to contact Key West Boats, Inc. IN
WRITING within fifteen (15) days of transfer, requesting a warranty transfer form.
WHAT IS NOT COVERED
The following is not warranted:
(1) A product which has been repaired or altered without authorization of
Manufacturer or altered in any way so as to affect its use and operations. Key West
Boats, Inc. reserves the right to improve or change the design or manufacture of Key
West Boat Models without any obligation to modify previous boats.
(2) engine, outdrive, controls, propellers, engine brackets, stereos, depth finders, GPS
units, trolling motors, batteries, outrigger bases or equipment or accessories which
are not manufactured by Manufacturer whether or not warranted by such other
manufacturer.
(3) Blistering or Discoloring, Gelcoat finish or crazing:
(4) Windshield breakage;
(5) Leakage around windshield, hatches or other apertures;
(6) Canvas zippers, vinyl, upholstery, plastic, fabric, trim or wood;
(7) Discoloration, oxidation, “bleeding”, or corrosion of Stainless Steel or other
metal products:
(8) A product which has been subjected to unreasonable use, tampering, abuse,
mishandling, improper maintenance, negligence, improper tailoring, alterations,
accidents, or used for racing or commercial purposes, or which has been operated
contrary to any printed instruction furnished by manufacturer.
(9) A product which has been overpowered according to the maximum recommended
engine horsepower specified on the attached capacity plate: