2
Accessories
›
6 standard range receiver extenders, model KD-X88SHRx
›
2 long range receiver extenders, model KD-X88LGRx
›
2 external power su12V/6.6A (80W) for powering of matrix and POH Rx units, model
›
IR Remote control, model KD-REMOTEHM88
›
6 ft. USB A to Micro USB data cable
›
8 IR emitters
›
Rack mount ears
Rack Mounting
›
Secure the included rack ears to each side of KD-Pro8x8D with the supplied hardware, then
fasten the unit to the rack rails with appropriate machine screw.
About KD-X88SHRx and KD-X88LGRx
HDBaseT receive extenders
›
Extends HDMI video + audio, and control (IR and RS-232) via a single CAT5e/6 UTP or STP cable
›
Powered at the matrix. No local power connections needed.
›
KD-X88SHRx:
»
Up to 200 feet @ 1080p/60, 1080p/24, 1080i, 720p
»
Up to 125 feet @ 4K/Ultra HD
›
KD-X88LGRx:
»
Up to 500 feet @ 1080p/60 (Long Range Mode)
»
Up to 328 feet @ 1080p/60 (Standard Range Mode)
»
Up to 328 feet @ 4K/Ultra HD
›
Long Range Mode:
»
If set to for Outputs 1 or 5, 1080p/60 signals are extended up to 500 ft. (152m). UHD/4K is
not supported if Long Range Mode is enabled
»
Must be set in unit via IR or control software
»
Must be set on desired KD-X88LGRx unit via Control Rotary
›
Installation best practices:
»
Use the shortest possible HDMI cable when connecting KD-X88SHRx / KD-X88LGRx to a
display. HDMI cables
≤
9ft recommended for optimum performance.
»
Ensure the CAT5e/6 cable runs directly from the switcher to the KD-X88SHRx / KD-
X88LGRx.
»
Do not use patch panels, punch downs, keystones, couplers, wall plates, etc.
»
Use shielded twisted pair (STP) cabling with shielded RJ45 connectors for optimum
performance and distances.
