19
RS-232 and TCP/IP Commands
KD-Pro8x8D allows control over serial interface for bi-directional communication.
Use pins 3, 4, 5 for RS-232 communication.
In addition to RS-232, the serial interface may also be accessed using a TCP/IP connection
»
Default IP address is 192.168.1.239, with default port 23
Connection Protocol:
»
Baud Rate = 57,600 bits per second
»
Data Bits = 8
»
Stop Bits = 1
»
Parity = None
»
Flow Control = None
»
Carriage Return: Required
Notes
»
Commands are not case-sensitive
»
Spaces are shown for clarity; commands should NOT have any spaces
»
After a new command is received, a prompt should be sent back
Response from Help command
– Returns entire API in readable format:
KD-Pro8x8D> H
-------------------------------------------------------------------------
-- Key Digital Systems HELP --
-------------------------------------------------------------------------
-- KD-Pro8x8D F/W Version : 1.03 --
-- System Address : 00 --
-- --
-- Azz : All Commands may have Prefix System Address zz=[01-99] --
-- H : Help --
-- PHO : Help for Output Setup Commands --
-- PHE : Help for EDID Setup Commands --
-- PHC : Help for Control I/O Setup Commands --
-- PHT : Help for Status Commands --
-- PF : Power Off --
-- PN : Power ON --
-- --
-- SPC A xx : Set System Address, xx = [00-99] (00=Single) --
-- SPC CM x : Set System Command Mode, x = [0-9] --
-- SPC UM x : Set System User Mode, x = [0-1] --
-- SPC FB E/D/T : Front Panel Buttons Enabled/Disabled/Toggle --
-- SPC BIRS z : IR Source, z = [1-3] (1-Wired, 2-Sensor, 3-IR MIX) --
-- SPC RSB z : Set RS232 Baud Rate to z bps, z=[0-4] --
-- [0:57600, 1:38400, 2:19200, 3:9600, 4:4800] --
-- SPC FAN z : Set FAN Speed z [0:OFF, 1-8:SPEED LEVEL, 9:AUTO] --
-- SPC DISP z : Set Front Display(LED) z [0:OFF, 1:ON, 2:AUTO] --
-- SPC TIME hh:mm:ss : Set Time by hh=[00~23], mm=[00~59], ss=[00~59] --
