
88 |
P a g e
WiFi Router Setup
It is required to set your WiFi router to
filter multicast (aka filter broadcast)
to ensure that your router is not
overwhelmed by the data broadcast from Enterprise AV units on the network.
Example of applying multicast filtering in a Linksys router:
*The following requirements must be met in order to support the live streaming feature of the Key Digital app
(1080p systems, KD-IP1080/KD-IP120 only):
Verified model = Cisco/Linksys EA6700 router
Network switch must support IGMP v3 and configured to enable IGMP v3.
Wifi Router
Must be configured so that multicast filtering is enabled. See above example
Must support 50Mbps bandwidth per iOS that will be streaming video
It is recommended that only 1 iOS be in the Live Stream page at a time
iOS Device
Best performance is with iPad4, iPad Air, iPad Mini. More powerful processing will always benefit.
Should have Static IP with Router IP corresponding to master network switch
Содержание KD-IP120POERX
