12
13
Help
‘H’: Returns a list of every available RS-232 command.
Status
‘STA’: Get global system status.
Factory Reset
‘SPCDF’: Reset the unit to factory default settings.
TCP/IP Settings
The KD-HD16x16ProK does not support DHCP. TCP/IP settings can only be changed via IP.
Follow the Network Setup commands above to configure your unit’s network settings.
Default TCP/IP Settings:
»
IP Address: 192.168.0.239
»
Network Mask: 255.255.255.0
»
Router Address: 192.168.0.1
»
TCP Port: 23
Firmware Update
Your KD-HD16x16ProK firmware is updated through a Web portal. You may also adjust your
device’s IP settings in this portal.
›
Open your web browser and type your unit’s IP (default IP: 192.168.0.239)
The Main page gives you basic device information:
The “F/W Upgrade” tab is used to update your device’s firmware:
The “Network” tab allows you to adjust the device’s IP settings:
The “IPM Upgrade” tab is used to upgrade the device’s IP module. The IP Module is used
for TCP/IP communication with the KD-HD16x16ProK.
