2
3
Quick Setup Guide
1. Begin with the KD-HD16x16ProK and all input/output devices turned off with power
cables removed.
2. Connect HDMI sources to the appropriate input ports on the KD-HD16x16ProK
3. Connect display devices via the RJ45 outputs and included KD-X16x16RX extenders.
4. Connect power to the KD-HD16x16ProK as well as to all other input and output devices
and turn them on.
5. Operate the KD-HD16X16ProK switcher via front panel buttons, IR Remote, Serial IR,
RS-232 or TCP/IP control.
Application Example
Operation:
After performing the setup above, the unit is ready for operation. There are several options for
controlling the unit. Commands can be issued via IR remote control, RS-232, TCP/IP or by using
the front panel buttons.
Note: Advanced commands are available only via the RS-232 and TCP/IP protocols.
Mounting:
Rack mount: Secure the rack ears to each side of the KD-HD16x16ProK with the supplied
hardware then fasten the unit to the rack rails with the included machine screws.
PCs (x4)
Satellite (x7)
Cable (x4)
RF Repeater
(Light/Shade Control)
RF
Ultra HD/4K
Digital Signage
Bar Area - Displays 1-4
Shades
Dining Area - Displays 5-8
Outdoor Area - Displays 9-12
Second Floor - Displays 13-16
Lights
Displays
Displays
Displays
Displays
Shades
Lights
CAT5e/6
Ethernet
KD-MC1000
KD-HD16x16ProK
HDMI
IR/RS232
CAT5e/6
KD-X16x16Rx
x4
WiFi Router
Master Controllers
RJ45
RJ45
RJ45
RJ45
x3
x16
x16
x16
x4
x4
x7
HDMI
HDMI
HDMI
RJ45
HDMI
IR
RS-232
HDMI
IR/RS232
RJ45
iPad
WiFi
KD-CSLX1
KD-CSLX1
HDMI
IR/RS232
CAT5e/6
KD-X16x16Rx
x4
KD-CSLX1
HDMI
IR/RS232
CAT5e/6
KD-X16x16Rx
x4
KD-CSLX1
HDMI
IR/RS232
CAT5e/6
KD-X16x16Rx
x4
KD-CSLX1
