29
28
Specifications
Technical:
»
Power Supply: KD-PS12V1ASC, 12V/1A, 100-240VAC, 50-60Hz,
Interchangeable head, screw-in connector
General:
»
Regulation:
CE, RoHS, WEEE
»
Enclosure:
Black Metal
»
Product Dimensions:
5.06” x 3.08” x 0.78”
»
Packaging Dimensions:
5.78” x 4.01” x 3.46”
»
Product Weight:
0.5 lb
»
Shipping Weight:
1.5 lb
›
All 3 ports share the same resources for IR burst generation. If more than one port is
configured for IR Emitter Mode, the data received will be queued by KD-CX800. The
device will then check the data buffer and generate the burst one by one. The receive
buffer size of each I/O port is 1024 bytes. If the receive buffer is full, all incoming
data will be discarded until all data found in the receive buffer is processed by the
device.
›
If KD-CX800 I/O port is configured for Serial RS-232 mode, all data received from
linked TCP traffic port will be forwarded back through this TCP port. If the traffic
connection is closed, the timeout timer will start and the device will keep receiving
data. If the traffic connection is opened again before the timer has expired, the data
will be sent back. If there is no connection before the timer has expired, the device
will close the port and clear any received data found in the buffer.
›
The RS-232 data buffers for I/O ports 2 and 3 can hold a maximum of 2048 bytes.
›
For I/O ports configured as trigger mode, output and input is enabled. The trigger
output can be set by both the TCP control port and the TCP traffic port. For trigger
input, a timer can be set to get the input state periodically. The trigger input state
is also automatically updated through the TCP traffic port when the input state has
changed. It is possible to query the input state directly on the TCP traffic port by
sending the string:
»
TRIN\r
