Page 17 of 24
HDMI 4x1
TM
Operating Instructions
In order to perform the Firmware Upgrade, be sure that your HDMI 4x1
TM
Switcher is set to
“Program” operating mode:
The power supply MUST be disconnected (either from the back of your unit or from the wall
outlet) to have a complete power shutdown - reset. Next, set the rear-panel Mode slide
switch to “Program” mode. Only select “Program” mode when you need to perform a
firmware upgrade of your HDMI 4x1
TM
Switcher unit, as provided and instructed by Key
Digital
®
.
Mode: Program
- Normal
Physically disconnect the power to your unit before setting
the rear-panel Mode slide switch to “Normal” mode
