Page 11 of 24
HDMI 4x1
TM
Operating Instructions
Basic Operation of the HDMI 4x1
TM
Switcher
Now that you have connected your A/V equipment and the power supply to the HDMI 4x1
TM
Switcher, you are ready to operate and control the unit.
Be sure that your HDMI 4x1
TM
Switcher is set to “Normal” operating mode, as instructed in
the prior Step in this Operating Manual:
Whenever power is supplied to your HDMI 4x1
TM
Switcher unit and your unit is “turned OFF,”
the unit is actually in “Standby” mode. To change operating Modes, power must NOT be
applied to your HDMI 4x1
TM
Switcher unit. The power supply MUST be disconnected (either
from the back of your unit or from the wall outlet) to have a complete power shutdown -
reset. Be sure the rear-panel Mode slide switch is set to “Normal” mode. (Only select
“Program” mode when you need to perform a firmware upgrade of your HDMI 4x1
TM
Switcher unit, as provided and instructed by Key Digital
®
.)
Controlling your HDMI 4x1
TM
Switcher unit:
Your HDMI 4x1
TM
Switcher is easy to control and operate, and you have several convenient
options for controlling your HDMI 4x1
TM
Switcher. All controls are available via:
•
Front-panel pushbuttons, with a handy LCD display for instant feedback. The pushbuttons
act to “cycle” through operations, and you can navigate with the Up, Down, Left, and
Right arrows. The LCD will display the current function.
To use the front-panel pushbuttons and LCD:
•
The LEFT and RIGHT arrow pushbuttons allow you to scroll through the different
“menus”
•
The UP and DOWN arrow pushbuttons allow you to scroll through the different
“options” or selections, for the given menu
•
The Select pushbutton allows you to invoke the Menu or Option selection
•
The Input Select pushbutton allows for convenient front-panel selection of which
1-of-4 Inputs to switch to the Output
