Key Digital Compass Control, Быстрая настройка

Страница: 3 / 18

½
1) Power Indicator
»
Power On (green)
»
Accepting update from manager (blue)
½
2) LAN Link Indicator
½
3) Status Indicator
»
Blinks whenever a signal is received
½
4) Active Internal WiFi Indicator
»
Note: Reserved for future use. Not currently active.
½
5) IR Learning Window
½
6) I/O Port Indicators (1 – 8)
»
Blinks when sending IR or RS-232 signals
»
Lights when sensor is active
½
7) Relay Indicators
»
Lights when Relay is active
KD-MC2500 Back Panel
The back of the KD-MC2500 has 2 Phoenix connectors for using the relays (each has
Common, NO and NC contacts) and the 8 IR/RS-232 1/8” mini plug connectors. These ports
can also be programmed to operate as sensors to determine the state of a piece of equipment.
Next to these is a hole to access the reset button. Along the bottom of the back panel are the
1/8” main Serial IR port, the RJ-45 Network connector, a USB connector (for KD-MC2500
Setup), a DB-9 connector for the main serial RS-232 connection, and the power connector.
KD-MC2500 Back Plate
½
1) Relay 1 & 2 connections
½
2) I/O Ports (1 – 8)
½
3) Reset switch
½
4) Main IR Out
½
5) RJ-45 LAN Connector
½
6) USB Port
½
7) Main RS-232 Connector (Bi-directional)
½
8) Power Supply Connector
Each side of the KD-MC2500 has tapped holes for attaching the rack
mount ears, vents for cooling, and the bottom has four removable rubber feet.
c. Matrix Switchers
Key Digital
®
Matrix Switches have been industry standard products since entering the market
in the late 1990’s. Besides offering superior Video switching capability, these products have
developed to offer Audio routing as well as Control routing. In all applications where multiple
A/V sources and displays are being used, adding a Key Digital
®
Matrix Switcher to the system
not only provides the A/V switching and routing, but also increases the control options. The
current product mix allows the Matrix Switcher to be used to route the control signals, either IR
or RS-232, to the remote sources or displays. These signals can even be sent through a choice
of Baluns allowing the use of CAT6/STP wiring to deliver A/V and control signals remotely. The
Compass Control
®
System uses this capability and provides a simple method of routing these
control signals while also switching the A/V sources to the proper displays.
KD-HD8X8BT - 8 Inputs to 8 Outputs HDBT/HDMI/DVI via Single CAT6/STP Matrix
Switcher with Audio Distribution System
1. Relay 1&2 Connections 3. Reset Switch
6.USB Port 4. Main IR Out 5. RJ45 LAN
Connector
7. Main RS-232 Connector
2. I/O Ports (1-8)
8. Power Supply
2 3