Key Digital Compass Control, Быстрая настройка

Страница: 14 / 18

10. Upload the Sample Project to the Server
Once the device is properly registered, the file can be uploaded to the server and then pulled
into the device through the App. When the file is completed, or at a point where testing is
required, go to the Communication ribbon and select ‘
Upload System Project ’. There will be
a prompt to log in to the Registration site using the User Name and Password created earlier.
Once entered, the file will begin uploading. Do not navigate away during this process. Once the upload
is done, a completion window pops up. The file has now been successfully uploaded to the server.
Back-up Project to Key Digital server
11. Download a Project to the iPad
Once the file has been created and uploaded to the server, use the App on the iOS 5 device
to pull the file into it. Launch the App and go to the Set-up page. Select Registration and hit
Update Project .
As soon as the blue Start button lights up, hit it to launch the project.
Update Project Button on iPad
1
2
24 25