Kewtech KT1795 Скачать руководство пользователя страница 12

Certificate of Conformity 

and Warranty 

  

     

This instrument has been calibrated 

using equipment which has itself been 

calibrated to standards traceable to 

International Standards monitored by 

BIPM (International Bureau of  Weights 

and Measures).

 This certificate guarantees that the 

product has been fully inspected and 

conforms to all the relevant published 

specifications.

FREE TWO YEAR GUARANTEE

Kewtech’s Two Year Warranty  enhances 

customers’ legal rights. It covers all 

manufacturing defects for a two year 

period but Kewtech reserves the right to 

exclude abuse or accidental damage.

RE-CALIBRATION SERVICE

Regular re-calibration is recommended 

for this instrument. Kewtech recommends 

that with normal use the instrument be 

calibrated at least once in every 12 month 

period. When the instrument is due for 

re-calibration return it to the address 

below marked for the attention of the 

Calibration Department.

Simply go to 

kewtechcorp.com  

to register your instrument

Product:

  

KT1795 Current Voltage Detector

Kewtech Corporation Limited

Unit 2, Shaw Wood Business Park, Shaw Wood Way, 

Doncaster DN2 5TB 

  01494 792 212

  

Содержание KT1795













Отзывы: