kewtechcorp.com
kewtechcorp.com
3.2 Operation
Main on/off switch
Turn the unit on by pressing and
briefly holding this button. The blue
LED above the finger guard flashes
slowly and is accompanied by a
single beep. This indicates that the
KT1700 electronics are working
correctly. Should this not happen
the KT1700 should not be used.
Safety barrier
Fingers must be behind
this barrier at all times
Entire front section
flashes plus
audible warning indicates greater
than 50V AC is present
Slow flashing blue LED
With a single beep
indicates that the
KT1700 electronics are
working correctly
Important
The tip of the KT1700 should be placed firmly in contact with the pole or metal cabinet or
exposed terminals/cables under test. Fault leakage voltage found or live phase conductors
above 50V will be indicated by the front section flashing red and by an audible tone.
Battery cover
