5
Features
Water Reservoir Lid
Water Reservoir
Water Reservoir Lock Tab Slots
Handle
K-Cup
®
Portion Pack Holder (E and F are
the K-Cup Holder Assembly)
Funnel
Lid
K-Cup
®
Portion Pack Assembly Housing
Housing
Drip Tray Plate
Drip Tray
Drip Tray Base
Vent
Power Cord
Brew/Drain Selector Switch
A
B
C
D
E
F
G
Brew Button
Power Button
Power Light (Green)
Auto Off Button
Auto Off Light (Green)
Heating Light (Red)
De-Scale Light (Amber)
Add Water Light (Blue)
P
Q
R
S
H
M
odel B145 Brewer
Controls and Indicators
I
J
K
L
M
N
4
1. Keep your Brewer turned ‘ON’ at all times.
To brew a fresh cup of coffee or tea anytime
you want, we suggest you keep your Brewer
turned ‘ON’ all the time.
However, you can set the Brewer to automati-
cally turn off two hours after your last brew.
Follow the simple instructions in Section 2,
page 8 to make using the Brewer convenient
for you.
2. For the best tasting gourmet coffee or tea,
Keurig recommends using bottled or filtered
water.
Water quality varies from place to place. If you
notice an undesirable taste in your cup of coffee
such as chlorine or other mineral taste, we
recommend you consider using bottled water or
water from a filtration system.
3. Plug Brewer into its own grounded outlet.
If the electric circuit is overloaded with
other appliances, your Brewer may not
function properly. If possible, the Brewer
should be operated on its own circuit, separate
from other appliances.
4. Brewing into a travel mug.
To brew into a travel mug, simply remove the
Drip Tray Assembly and place the travel mug
on the Drip Tray Base.
1. Place Brewer box on a large steady surface
(such as a table or countertop) or on the
floor. Open the box.
2. Remove the Quick Start Guide, Use & Care
Guide and other literature.
3. Turn the box on its side with top of box
facing you.
4. Reach into the box and grasp the plastic
bag that contains the Brewer.
5. Carefully pull the plastic bag (and
packaging materials) toward you and out
of the box. The Brewer will still be encased
in the polyfoam.
6. Remove the polyfoam packaging
material.
7. Carefully place the brewer upright on a flat,
steady surface.
8. Lift plastic bag off of Brewer.
9. Write the serial number of the brewer on
page 3 of this manual. The serial number
is located on the label on the back of the
brewer.
10. Place the Brewer upright on a flat,
steady surface. Remove tape holding
Water Reservoir in place.
We recommend you save all packing materials
in case future shipping of the product is
necessary.
SET-UP & OPERATION
Helpful Hints
SECTION 1
WARNING:
Keep all plastic bags away
from children.
Unpacking Instructions
A
B
D
E
F
C
J
K
G
L
M
N
I
H
T
U
V
W
O
O
W
V
U
T
R
P
S
Q
