Release
Press
4.
When the tablet is fully dissolved,
press and hold
the START
button for 10 seconds until the water tank light turns on and
the START button flashes
purple.
Make sure you have an empty half-gallon
container under the tap.
5.
Release and press the START button again to begin the
Clean Cycle. The START button will pulse
purple
while
pulling in the water from the tank. If you run out of water,
the tank light will flash. Fill with more water, about halfway
to the lower line.
6.
After 60 seconds, the START button will begin flashing again
when it is ready to empty the cleaning solution and start
the Rinse Cycle.
Hold for 10
Seconds
Make sure to keep the Pod basket in the Home Bar while running a Clean Cycle.
14
