10 min.
1 Tablet
Half Gallon
Container
Running the Rinse Cycle
Periodically run the Rinse Cycle to run fresh water through
your Home Bar internals. To run a Rinse Cycle, start by
rinsing and filling the water tank with clean water. Then
place an empty half-gallon container under the tap. Next,
press and hold
the START button for 10 seconds. Release
the START button when it flashes purple. Now
press and
hold
the START button while the machine draws in and
dispenses the water. When you are done, release the START
button and the Home Bar will purge the remaining water
inside and your rinse will be complete.
Make sure to keep the Pod basket in the Home Bar while
running a Rinse Cycle.
Tip:
Run a Rinse Cycle with ice-cold water to pre-chill the
inside of your Home Bar and get your drinks extra cold!
Running the Clean Cycle
The Clean Cycle is a two-phase process. In the first
phase, you will rinse your Home Bar with cleaning
solution (in the form of a Drinkworks cleaning tablet).
In the second phase, you will rinse your Home Bar
with clean water.
To run a Clean Cycle, you will need about 10 minutes,
one Drinkworks cleaning tablet and a container that
can hold at least a half-gallon of water to place
under the tap.
It is recommended to run a Clean Cycle every 90 days.
12
Release
Press
Hold for 10
Seconds
