6
Button functions
Button Function
Light on/o
ff
• Pressing the button switches the mirror on with the
selected settings. The white LED goes o
ff
.
• Pressing the button again switches the mirror o
ff
.
The white LED lights up.
• The white LED can be deactivated.
– Switch on the mirror.
– Press and hold the button for 10 seconds.
- The lighting goes o
ff
.
- A short light impulse indicates that the white
LED was deactivated.
To switch the white LED back on, repeat the de-
scribed procedure.
Front and wall lighting
• The front and wall lighting is switched on by press-
ing the button when mirror is switched on.
• Pressing the button again switches the light o
ff
.
Washbasin lighting
• The washbasin lighting is switched on by pressing
the button when mirror is switched on.
• Pressing the button again switches the light o
ff
.
When both lightings are switched o
ff
, the mirror also
switches o
ff
.
Dimming the front, wall and washbasin lighting
• Press the button when the mirror is switched on
and hold until the desired brightness or the end
value has been reached.
The setting is stored and reproduced when switched
on again (only for connection type I).
Setting the light colour cooler
• Press and hold daylight white button and the light
colour fades to cool white.
• Release when the desired light colour has been
reached.
The setting is stored and reproduced when switched
on again (only for connection type I).
Adjusting light colour - daylight white (cool white)
• Press button and the colour temperature sets to
6500 Kelvin.
Setting the light colour warmer
• Press and hold warm white button and the light
colour fades to warm white.
• Release when the desired light colour has been
reached.
The setting is stored and reproduced when switched
on again (only for connection type I).
Adjusting light colour - warm white
• Press button and the colour temperature sets to
2700 Kelvin.
EN
Important information, please make sure to read!
Replacement parts with order numbers
, see pages 23.
The light sources may only be replaced by the
manufacturer, its customer service or by an equally
quali
fi
ed person.
For information about warranty and maintenance, see
the enclosed
Maintenance and Warranty Passport
.
Disposal information!
Equipment with this labelling
must
not
be disposed of in household refuse, but must
be disposed of at a collection centre intended for this
purpose.
