Kett VZ-330, Руководство по эксплуатации

Страница: 8 / 24

8
Insertion Slot
The printing surface
is the outside of the
thermal paper roll.
5
Keep pressing the FEED button until the thermal
paper feeds straight and smoothly.
6
Close the paper cover and push down on it to lock it
into place.
＊
Load the paper in an area protected from direct
sunlight.
＊
When the thermal pap er is set corre ctly, the
OFFLINE LED stops blinking and stays on to indicate
the printer is still in OFFLINE mode.
＊
When the paper is about to run out, red lines appear
on both sides of the paper.
1
Lightly push up on the front of the paper cover with
your thumb and rotate it toward the back of the printer.
2
Turn on the power.
3
Cut the tip of the thermal paper straight across. New
Paper can be inserted as is. (See figure on right)
4
Push the tip of the thermal paper into the inlet at
the bottom of the paper holder, until the auto-loader
catches it and feeds about 10cm of it through the
paper cutter.
5. Loading the Paper