Kett VZ-330, Руководство по эксплуатации

Страница: 19 / 24

19
Symptoms Check Point Action
4
The printer does not print
or stops during printing.
Are the SWDIP switches set correctly? Set them according to the “Function setting guide”.
Is the printer cable connected correctly?
Please confirm whether for the cable to left out or to
be connected correctly.
Is the print setting of the measuring
instrument correct? (Only the measuring
instrument with the print setting) Please confirm whether to be set correctly referring
to the operating manual of the measuring instrument.
Please set it correctly when it is not correct.
Are you using back of paper? The outside is the front. See Section 5.
5
The printing is light or
dark.
Is the temperature very high or low? Use the printer at 0 to 40
℃
.
Are the SWDIP switches set correctly?
Please confirm whether the setting is suitable for the
measuring instrument referring to attached paper
"Function setting guide". Please set it correctly when
not suitable.
Please set it referring to Section 7 when you want to
change the density arbitrarily.
6
Both the ONLINE and
OFFLINE LEDs on, and
the buttons cannot be
operated.
Do the head return to the home position
even when the power is turned on?
Do the head return to the home position at
interval home return?
Turn off the Power Switch. And remove the foreign
material.
Is printing attempted at extremely low or
high ambient temperatures?
Use the printer at 0 to 40
℃
.
Do the battery runs out? See Section 9, charge the battery pack.