10
(2) The cleaning operation is difficult when the rotation arm is at the upper part of the
drum.
Press the
key in order to move the rotation arm to the lower part of the drum.
Press the
key again once the rotation arm is positioned at the lower part of
the drum. Rotation stops after pressing the key. Rotation stops automatically after 10
seconds.
* Note : For safety, the motor will not rotate when the transparent panel is not installed.
Also, if the transparent panel is lifted when the motor is rotating, rotation will stop.
(3) Lift the lug of the internal transparent panel, and pull the internal panel out
to the front.
* Note : Breakage may result if the transparent panel is forcefully pulled out.
6-1. Cleaning the Internal Feed Unit
Allowing the sample to remain in the internal feed unit results in damage and reduced measurement
efficiency. Please clean the internals as needed and as described below.
N o t e
6. Measurement Precautions
Side Door
Transparent
Panel
Lug
(1) Open the side door of the main unit and check whether samples remain
in the feed unit ( samples remain on the screw).
[Upper Part of Drum]
[Lower Part of Drum]
×
○
Rotation Arm
Rotation Arm
