9
(4) When the start/stop switch at the upper left of the main unit or
the
key is pressed, the next measurement may be made.
* Note 1: Even if the printer is still printing, as long as the motor has stopped,
the next measurement may start.
* Note 2: To stop a test in the middle of a measurement, please press the
"start/stop" switch. The average moisture value for the number of
kernels measured up to that point will be displayed.
* Note 3: When kernels have not been counted within 30 or more seconds,
the buzzer will sound and "POURING" will be displayed. Since the
sample may have run out, or the sample may have plugged the
screw feed, please check the interior of the drum. This display will
disappear after sample is again loaded and the count starts.
