SYMBOLS
The symbol on the Caution Label is mean to convey this message. Ne pas exposer a la pluie et ne pas utiliser dans les emplacements humides. Don’t use
power tools in damp or wet locations.
Defi nitions of Symbols
Class II Construction
(Double insulated motor) =
Underwriters Laboratory =
n
o
= No load speed
/min = Revolutions per minute
AC = Alternating current
(
)
Hz = Hertz
A = Amperes
V=Volts
Motor
Be sure your power supply agrees with nameplate marking. Use Alternating Current Only (50 to 60 Cycles), 120 volts. Voltage variation of more than 10%
will cause loss of power and overheating. Motors are factory tested. If this shear does not operate, check the following: supply line for blown fuses; plug and
receptacle for contact. This tool will stop when the brushes wear to a preset length. Damage to the motor is thus avoided.
