11
Measurement method
Measurement results
Average display
5. EASY OPERATION GUIDE
Display
Cause
+ +
.
+
The upper limit of the
displayable
range is exceeded.
－－
.
－
The lower limit of the
displayable
range is exceeded.
＊＊
.
＊
Conversion failed.
(9) Incere the sample case to the
measurement chamber.
(14) The measurement is in progress.
(10) Close the cover with the meas-
urement chamber set. Then,
press the [NEXT] key.
(11) The measurement is in progress.
* Never open the cover.
(12) Take out the sample case, and
reverse the case, then set it
again into the chamber.
(13) Firmly close the cover, and then
press the [NEXT] key.
* Never open the cover.
(15) The measurement result will be
displayed.
* Pressing the [MEASURE] key in
this screen will enable a new
measurement.
*
Pressing
the [Home ] key will
restore the initial screen.
The average of the measured times
will be displayed.
When the measurement is repeated,
the count number increments. (1 to
9th at maximum.)
Press the [AVG] key.
(16) The measurement is complete.
Take out the sample case.
The following is the display example of meas-
urement results within the displayable range.
* Pressing the [MEASURE] key in this
screen will enable a new measurement.
* Pressing the [Home ] key will restore
the initial screen.
* After the average is displayed, the num-
ber of measurement times will be reset
and the next measurement will be count-
ed as 1st.
