IT
5
Messa in funzione
5.1
Esecuzione dell’inizializzazione
Accertare che il serbatoio dell’impianto di separazione sia stato riempito fino al livello statico con acqua pulita e che la
distanza tra stelo del sensore e linea dell’acqua (livello statico) sia pari a 50 cm (configurazione standard).
Innestare la spina di rete elettrica.
L’inizializzazione della centralina si avvia automaticamente.
Al momento dell’inizializzazione vengono richieste le seguenti immissioni:
|Lingua|
|Data/Ora|
|Norma|
|Dimensioni nominali|
|Calibrazione|
Per una misurazione priva di errori, le immissioni di
|Norma|
,
|Dimensioni nominali|
devono essere effettuate
correttamente. Le indicazioni devono si trovano sulla targhetta dell’impianto. La
|Calibrazione|
deve essere effet-
tata con l’acqua pulita al livello statico e con la sensoristica in posizione corretta.
Immissioni sulla centralina
Selezione tramite i tasti-freccia.
Confermare il salvataggio nella memoria di sistema con
|OK|
.
L’inizializzazione è conclusa, la centralina carica la memoria-programmi.
Negli impianti speciali, nella centralina lo spessore dello strato per il preallarme e l’allarme potrebbe dover essere ade-
guato in base alla documentazione allegata.
L’impianto è pronto per funzionare.
5.2
Effettuare le impostazioni
Impostazione del tempo di chiusura / dell’intervallo di misurazione
Le misurazioni affidabili dello spessore dello strato sono possibili solo se non si verifica nessun afflusso d’acqua nel separa-
tori di grassi, ad esempio mentre la cucina è chiusa. In questo periodo di chiusura deve essere definito l’intervallo di misu-
razione ripetitivo giornaliero. Se durante l’intervallo di misurazione la cucina è in funzione, la centralina riceve dei risultati
non validi. Se per periodi di tempo maggiori dell’intervallo di misurazione vengono misurati dei risultati non validi, lo spessore
dello strato non valido (“--”) viene visualizzato e inserito nel menu
|1.7 Dati misurati|
.
Determinare l’orario di chiusura giornaliero della cucina.
Nella centralina, accedere a
|Impostazioni|
e
|Parametri|
e navigare al punto del menu
|Intervallo di
misurazione|
(password: 1000).
Definire l’inizio e la fine dell’intervallo di misurazione e confermare con OK.
Calibrazione del sensore
Accertare che l’impianto di separazione sia stato riempito fino al livello statico con dell’acqua pulita.
Calibrare il sensore.
Confermare il valore con “OK”.
La calibrazione del sensore deve essere ripetuta dopo ogni smaltimento.
54 / 96
Istruzioni per l’installazione e l’uso
016-283
Содержание SonicControl
