H
D
E
K
E
1
12.
000
1.0
10.
428
.00
00.
00
40
37240
000
10/15
1. Contents and target
group of the in-
structions
These operating instructions describe the programming and start-up of FREElift flap
fittings with motorised opening and closing.
The operating instructions and the separate installation instructions must be re-
tained until the product is disposed of and passed on to the new owner in the event
of resale or transfer.
The operating personnel must be informed how to handle the product in a safe and
proper way.
2. Safety regulations
2.1 Meaning of the safety instructions
The safety instructions in these operating instructions are classified according to the
severity of the danger.
2.2 Safety instructions
WARNING
This safety instruction marks a hazardous dangerous situation that could
lead to severe physical injuries.
NOTE
Notes are used to point out the possibility of consequential damage to the product
if they are not complied with. The note is also used to provider important additional
information.
Basic safety instructions
» Installation and connection, start-up, maintenance and dismantling must only
be carried out by trained experts.
» Have all repairs carried out by trained experts. A repair is needed if the device
has been damaged, e.g. due to damage to the power cable or plug, fluid spill-
age, objects that have fallen inside, moisture, malfunctions or dropping the de-
vice.
» Do NOT use the in the vicinity of water or in damp rooms. ONLY clean the
FREElift eTouch drive with a dry or slightly moist cloth. The FREElift eTouch
drive must not be buried or covered by objects, products (e.g. food), nor may
these materials be allowed to penetrate into the housing.
» The connection may only be made using the provided power supply unit of
type FW7436/24. Do not allow the power cable to be subjected to loads or
kinked.
» Protect the FREElift eTouch drive from oil and aggressive cleaning agents.
» Do not open the fitting, the drive unit, the power supply unit or the push-button
sender. Unauthorised modifications to the fitting will invalidate the manufactur-
er's liability for any resulting damage.
» Do not hold onto the flaps when they are being opened or closed, or reach into
the movement range of the lever arms.
Electrical safety
» The power supply unit must comply with the information on the type plate.
» The power plug and the power supply unit must be easily accessible.
» Never immerse the power supply unit in water, expose to humidity, or touch
with wet hands. Risk of short circuits and fire.
» Never replace or modify the power plug or the power cable.
» Never pull on the power cable - always hold the power plug.
BA_MA_Free-Kesseböhmer.book Seite 10 Freitag, 12. Juni 2015 9:50 09
