Kesla XS 190, Руководство по эксплуатации и техническому обслуживанию

Страница: 49 / 83

Kesla
®
XS
190
SELF PROPELLED TELESCOPIC PLATFORM
48
Kubota D905-E service programme
Kubota D905-E
Daily, Check oil; check for leakages, correct as required before use.
with the engine Check level and cleanliness of oil. Add oil when required.
switched off: Check coolant level. NOTE! DO NOT OPEN THE FILLING
OPENING OF THE COOLING WATER SYSTEM IF THE
ENGINE IS WARM. LET THE ENGINE COOL DOWN AT
LEAST 30 MINUTES AFTER USE BEFORE OPENING THE
FILLING PLUG OF THE COOLING SYSTEM. Add coolant
when required.
Check for loose bolts and nuts and tighten if needed.
Daily, Listen to the sound of the engine. Switch off the engine if the
with the engine
switched on engine rpm reduced or increases suddenly (the engine
does not run smoothly), of if there is unusual interference
sound.
Check the exhaust gas colour. Stop the engine if the exhaust
gas suddenly turns black.
Stop the engine if the oil pressure warning lamp or the coolant
temperature warning lamp is lit while the engine is running.
After the first 50h
of operation Change engine oil and oil filter.
50h intervals Check fuel pipes and hoses, tightness of their connections, and
condition of hose clamps.
100h intervals Clean the air filter element..
Check the battery electrolyte level.
Check the fan belt tightness and wear.
200h intervals Change engine oil and oil filter.
Check the radiator system and the radiator cell, and check the
condition of the radiator.
400h intervals Replace the fuel filter element.
500h intervals Clean the radiator system and the radiator cell, and check the
condition of the radiator.
Replace the fan belt..
800h intervals Adjust valve clearances.
12 month intervals Replace the air filter element. **
Check the electrical wires for damage; check the condition of
the connectors.
Replace the fuel hoses and hose clamps.
24 month intervals Replace the radiator hoses and hose clamps.
Change the coolant.
** Once a year of every six cleanings.