7
Safety instructions
•
If possible, always drive across (horizontally) to the slope!
•
Only drive on rough and dry ground on steep slopes! Moisture and rain increase the risk of slipping
out and slipping.
•
On steep slopes, lattice wheels or sprockets must be used to prevent the tractors from slipping
off.
•
In emergency situations, if, for example, the machine slips sideways in the slope, always release
the handles! You as an operator do not manage with their physical strength to prevent the
Einachsschlepper on slipping and are otherwise carried away.
3.2.6 Leaving the machine
•
When stopping the machine, close the fuel cock (if present)!
•
By using wheel chocks or, if necessary, by applying the parking brake, secure the machine from rolling
away when leaving the vehicle.
•
Secure the device against unauthorized use!
•
Switch off the engine and, if present, remove the ignition key or the spark plug connector!
•
Never leave the machine unattended while the engine is still in operation!
3.2.7 Screw connections and tires
•
When working on the wheels, make sure that the device is safely parked and secured against rolling
away!
•
Regularly check nuts and bolts for tightness and retighten if necessary.
•
Repair work on the tires must only be carried out by qualified personnel and with suitable mounting
tools!
•
If the tire pressure is too high there is a risk of explosion!
•
Check the air pressure regularly!
3.2.8 Coupling and uncoupling attachments
•
Attach and remove attachments only when the engine is off and the PTO is off.
•
When replacing attachments and their parts, use suitable tools and
•
Wear gloves.
•
When mounting and dismounting, bring the required support equipment into the respective position
and ensure sufficient stability.
•
Secure the rear-mounted tow tractor with an attachment to prevent it from rolling (parking brake, wheel
chocks).
•
When attaching attachments, there is a risk of injury (crushing). Special care is necessary.
•
Attach implements according to regulations and fix in the prescribed places.
3.2.9 Maintenance, cleaning and repair work
•
Do not carry out maintenance and cleaning work on the running engine!
•
When working on the engine, always remove the spark plug connector.
•
If guards and working tools are subject to wear, they must be checked regularly and replaced if
necessary.
•
Damaged cutting tools must be replaced.
•
When replacing cutting tools, use suitable tools and wear protective gloves.
•
Only use original spare parts from the manufacturer, as these comply with the technical requirements
and thus the risk of accidents is minimized
