Kersten RIPAGREEN 341053, Руководство пользователя

Страница: 5 / 24

-
3 -
WARNINGS
TO BE READ BEFORE STARTING FOR THE FIRST TIME
HAZARDS
Do not use this device in
regulated areas with spe-
cific fire or explosion haz-
ards
Do not treat surfaces
covered with dry grass
or dead leaves to avoid
any risk of fire.
Clear the area to be treat-
ed of any flammable ob-
jects. Avoid treating areas
near very highly flamma-
ble resins
GUIDELINES
Delineate a working area
such that the tip of the
thermal lance is always at
least more than 1.5 m in-
side this area and prohibit
access to unauthorised
individuals
Warn and place signs
around the area before
starting work.
Supervise the area treat-
ed approximately 1 hour
after treatment
Do not work near grass or
dried leaves. Pay particu-
lar attention during windy
conditions to the flame
being carried and to flying
objects on fire (twigs,
leaves, paper, etc.). Do
not work on non visible
areas (door, garage,
basement…)
Check the material used in the construction of the walls, claddings, buildings of
the treated area. If you are not aware of the composition of them, ask to the per-
son in charge of the building. He will give you information on material and risks in
the treated area . Define a path that avoids these risks.
EQUIPMENT
Have to hand an appropri-
ate fire extinguisher or
suitably-sized spray filled
with water
Wear heat-resistant
gloves while using the
device
Avoid wearing highly flam-
mable nylon or similar
clothing