Mähraupe HyCut
Operation
DE
2021-01-27
35 / 65
6.3
Turning on the tracked mower
DANGER
Risk of death and injury due to escaping exhaust gases in enclosed spaces
and movements during and after the start-up process!
There is a risk of death and injury due to escaping exhaust gases in enclosed
spaces and movements during and after the start-up process.
•
The engine must not be operated in enclosed spaces.
•
Do not use starting fluid when using electrical start-up aids (such as jump
leads).
•
Always make sure that there is sufficient ventilation.
You can find the part numbers in the following list in Chapter 6.2 Wireless remote
control on Page 31.
1.
Plug in and turn on the disconnect switch.
2.
Turn on the remote control using the on / off switch (15).
3.
Check to make sure that both emergency stop buttons are open.
4.
After the “Stopped” message appears on the display, press the horn (17) to
confirm that the connection between the remote control and the machine has
been established.
5.
The tracked mower is now ready to use and can be electrically driven with
the drive lever (1 and 9), or you can push the toggle switch (4) up and turn
on the combustion engine.
Manual start
Fig. 12: Recoil starter
