Kersten B00005 Скачать руководство пользователя страница 5

 

 

Safety notes for Hydrauic two wheel Tractor 

 
The important safety instructions in this manual cannot cover all possibilities. It goes without saying 
that common sense and caution are factors which are not installed in a machine, and must be used 
by the person who operates and maintains the machine. 
 

To keep the risk of accidents as low as possible, please note the following subchapter  

 

1.1  Applications 

 

 

The two-wheel tractor and the equipment is approved by the manufacturer for the respective usual 
or  customary  use  and  work  in  agriculture  and  forestry,  such  as  Green  space  and  park 
maintenance and winter maintenance. 

 

Any other use is considered improper. The manufacturer is not liable for any damage caused by 
using the machine in other applications, these risks must be borne solely by the operator. 

 

Intended  use  also  includes  compliance  with  the  manufacturers  written  operating,  service  and 
maintenance requirements. 

 

The machine must only be used or serviced by competent persons,  who are  fully  aware of the 
dangers. 

 

The  relevant  accident  prevention  regulations  and  other  generally  recognized  safety  and 
occupational health regulations must be observed. 

 

Unauthorized modifications to the machine will void the warranty of the manufacturer for resulting 
damage. 

 
 

General safety and accident prevention regulations 

 

1.1.1  Principles 

 

Note  Besides the recommendations in this manual, the general safety and accident prevention 
regulations! 

 

The machine must not be used by persons under 16 years, even under adult supervision! Children 
and adolescents should be instructed not to play with the appliance!  

 

Only trained personnel or persons may use this machine! 

 

When using on public roads, follow the respective legislation! 

 

The machine is not approved for public transport! 

 

The user should avoid wearing loose clothing and wear protective footwear! 

 

Work only in good light and visibility! 

 

The  warning  and  safety  signs  attached  to  the  machine,  provide  important  information  for  safe 
operation; Comply for your own safety! 

 

For transport on vehicles or trailers, the engine must be switched off! 

 

Be careful with moving parts on the machine, which could cause harm; Keep a safe distance. 

 

Beware  of  parts  still  moving  after  the  machine  is  stopped.    Wait  until  everything  has  finished 
moving before working on the machine. 

 

Driven parts can cause crushing or shearing injuries! 

 

The transport of persons and objects with this machine is forrbidden! 

 

handling,  steering  and  braking  ability  and  tilting  behavior  are  influenced  by  mounted  or  trailed 
equipment and loading. For this reason, only attachments approved by the manufacturer may be 
used. The operating speed should be adapted to suit the particular circumstances. 

 

Do not modify the upper idle speed of the engine. Too high a speed increases risk of accidents! 

 

Unauthorized alterations, which endanger the operational safety of the machine are prohibited! 

 

Before each use check to make sure the machine is operating properly.

 

 

 

 

Содержание B00005



























Отзывы: