benchmarkwireline.com
P. O. BOX 850
Fax: 281.342.4848
Phone: 281.342.6415
Simonton,Texas 77476
36220 FM 1093
June-2007
Rev D
Page 8 of 18
4.3 SL
mode
This mode is used for a Kerr SHARK slickline sytem using a 4’
counter wheel.
The available menu selections in SL mode are:
LINE SIZE SETTINGS (LS)
Select the size of the cable you will be using. This setting will
adjust the wheel size to account for this size of cable.
The available sizes are:
1/4
, 7/32, 3/16, .125, .108, .092, .082,
DEPTH ADJUST (Adj)
This setting is comparable to shimming a wheel. The amount
selected will automatically be added or subtracted from the
depth input. The values are feet / thousand.
DEPTH UNITS (UN)
This setting is used to set the display readout units to either
FEET or METERS.
DIRECTION (dir)
This setting is used to reverse the counting direction. The
depth should be increasing as you are going into the hole and
decreasing as you are coming out of the hole. If it is going the
opposite direction, use this setting to change it.
