benchmarkwireline.com
P. O. BOX 850
Fax: 281.342.4848
Phone: 281.342.6415
Simonton,Texas 77476
36220 FM 1093
June-2007
Rev D
Page 7 of 18
4.2 5K
mode
No wheel size selections are available. It is set for 2’. Use the
setting for any straight-line measuring device that uses a 2 foot
measuring wheel.
The available menu selections in AM5K mode are:
DEPTH ADJUST (Adj)
This setting is comparable to shimming a wheel. The amount
selected will automatically be added or subtracted from the
depth input. The values are feet / thousand.
DEPTH UNITS (UN)
This setting is used to set the display readout units to either
FEET or METERS.
DIRECTION (dir)
This setting is used to reverse the counting direction. The
depth should be increasing as you are going into the hole and
decreasing as you are coming out of the hole. If it is going the
opposite direction, use this setting to change it.
