Kero-Sun KOR-09, Инструкция по эксплуатации

Страница: 6 / 12

6
ENGLISH
Disposal of old Electrical & Electronic Equipment (Applicable in the European Union
and other European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of cor-
rectly, you will help prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural resources. For more detailed information about recycling
of this product, please contact your local city of
fi ce, your household waste disposal service or the shop
where you purchased the product.
4. Turn the thermostat knob clockwise to maximum position. When the room temperature rises
to a comfortable level, slowly turn thermostat counter-clockwise until the indicator light just
goes out. To adjust the room temperature turn the thermostat clockwise to raise the tempera-
ture, or counter-clockwise to lower it. Thus the heater will attempt to keep the room tempera-
ture at the desired level.
5. To turn off the heater, set the power switch to “0” position. The power indicator light turns off.
Unplug the product from the electrical outlet when it is left unattended or is not in use.
Overheat Protection
This heater is protected with overheat protection that switches off the appliance automatically
in case of severe overheating. In this case, unplug the appliance, wait about 30 minutes for it to
cool and remove any possible cause of overheating, eg. something covering the heater. Check
for damage to the appliance, the cord and the plug. If there is no damage, plug the unit back in
and switch it on as described above. If the heater still does not turn on, please contact Customer
Service for assistance.
Safety Control (Tip over switch)
If the product is fallen down or is installed upside down, due to the function of tip over switch, it
will stop working automatically. And when the product is put to the right upside position, it will start
working as normal again.
Cleaning and Storage
We recommend that the heater be cleaned at least once a month and before off-season storage.
1. Turn the heater OFF and unplug it. Allow it to cool completely.
2. Use only a dry cloth to clean the external surface of the heater. DO NOT USE WATER, MAX,
POLISH, OR ANY CHEMICAL SOLUTION.
3. Clean your heater using the above-mentioned steps, then pack the heater in its original con-
tainer and store it in a cool, dry place.
4. This heater does not disassemble.