Kernau KFDW 4641.1 W, Руководство пользователя

Страница: 42 / 55

EN
42
In order to change the rinse aid level, follow the below steps before turning on the machine:
•
Push the programme button and hold it down.
• Turn on the machine.
•
Hold down the programme button until “rA” disappears from the display. Rinse aid setting follows
water hardness setting.
•
The machine will display the last setting.
• Set the level by pushing the programme button.
•
Switch off the machine to save the setting.
• The factory setting is “4”.
•
If the dishes are not drying properly or are spotted, increase the level. If blue stains form on your
dishes, decrease the level.
LEVEL BRIGHTENER DOSE INDICATOR
1 Rinse-aid not dispensed R1 is shown on the display.
2 1 dose is dispensed R2 is shown on the display.
3 2 dose is dispensed R3 is shown on the display.
4 3 dose is dispensed R4 is shown on the display.
5 4 dose is dispensed R5 is shown on the display.