KERN VHE, Руководство по эксплуатации, Страница: 8 / 15

On the installation site observe the following:
ƒ The load must be lifted clear of the display unit’s case and other pallets.
Incorrect lifting of a load Correct lifting of a load
ƒ The load must be lifted evenly distributed, so that it has the lowest
measurement insecurity (deviations up to 0.8% of the capacity may occur).
ƒ Inclined position of the weighing system can falsify the weighing result. Holes
and unevenness, too, have this effect. A smooth floor is ideal.
ƒ Optimum accuracy in weighing results is achieved if the load centre is
between the forks. The forks are easily bent and twisted when the load is off-
centre. This may result in diminished accuracy.
ƒ Avoid jarring during weighing
ƒ Protect the balance against high humidity, vapours and dust
ƒ Do not expose the device to extreme dampness for longer periods of time.
Non-permitted condensation (condensation of air humidity on the appliance)
may occur if a cold appliance is taken to a considerably warmer environment.
In this case, acclimatize the disconnected appliance for ca. 2 hours at room
temperature.
ƒ Major display deviations (incorrect weighing results) may be experienced
should electromagnetic fields (e.g. due to mobile phones or radio equipment),
static electricity accumulations or instable power supply occur. Change
location or remove source of interference.
6.2 Scope of delivery
Serial accessories:
•
Pallet truck scales
•
4 x 1.5V AA batteries
•
Operating Manual
8 VHE-BA-e-0810