KERN PLJ Скачать руководство пользователя

Страница: 25 / 101

TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011

5 Basic safety instructions

5.1 Compliance with the instructions included in the user manual

Before you set and start the device, read this user manual
thoroughly even if you are familiar with KERN scales.

All language versions contain non-binding translation.
Only the original document in German is binding.

5.2 Personnel training

The device can be operated and maintained solely by trained workers.

6 Transport and storage

6.1 Checking during reception

Immediately after you have received the shipment, please check if it is free from any
visible outer damage. The same applies for the unpacked device.

6.2 Packaging / return transport



Please keep all the parts of the original packaging in case you had

to send it back to us.



Always use the original packaging for the return transport.



Before you dispatch the device, disconnect any connected cables

as well as loose/moving parts.

Содержание PLJ






































































































Результаты поиска

Содержание PLJ

Отзывы:

Похожие инструкции для PLJ

Бренды по названию

Популярные бренды

KERN PLJ, Руководство по эксплуатации

Результаты поиска

Содержание PLJ

Отзывы:

Похожие инструкции для PLJ

Бренды по названию

Популярные бренды