KERN OLM 171, Инструкция пользователя

Страница: 22 / 27

21 OLM-1-BA-e-1610
7
Changing the fuse
The fuse housing is on the rear of the microscope below the mains power supply
socket. With the device switched off and unplugged, you can pull out the housing.
When doing this, it is helpful to use a screwdriver or similar tool (
see left illustration ).
The defective fuse can be removed from its housing and be replaced with a new one
(
see middle illustration ).
After that, you just need to insert the fuse housing back into the insertion point below
the mains power supply socket (
see right illustration ).