MPS / MTS / MXS / MWS-BA-e-1215
32
8 Using scale
8.1 Weighing
Switch on the scale with the
[ON/OFF]
key. The diagnostic scale self-check is
performed and then the software version is displayed. The scale is ready for
weighing when the „
0,00 kg
” weight display is shown.
Direction: The
[
0
]
key makes it possible to zero the scale if necessary and
at any time.
Place a person in the middle of the scale. Wait until the stability display (
ο
) is
shown and then read the weighing result.
Direction
:
If a person is heavier than the weighing range, the display will show the „Err” symbol
(= overload).
8.2 Taring
The dead weight of any initial load used for weighing may be tared away by pressing
the key, so that the following weighing shows the real weight of a person to be
weighed.
E.g. when a rubber mat is put on the scale plate, the scale does not
show 0 value.
To start the taring process, press the
[TARE]
key. Now internal weight
saving is performed and value of
0.0 kg
is displayed.
Place a person in the middle of the scale plate.
Then read the weight on the display.
Direction:
The scale can store only one tare value.
When the scale is unloaded, the saved tare value is displayed with „negative” sign.
To delete the saved tare value, unload the scale plate and then press the
[TARE]
key.
