KERN KFB-TAM, Инструкции по эксплуатации и монтажу

Страница: 80 / 203

12 KFB/KFN-TAM-BA_IA-e-1832
6 Unpacking and placing
6.1 Installation Site, Location of Use
The display units are designed in a way that reliable weighing results are achieved in
common conditions of use.
Precise and fast work is achieved by selecting the right place for your display unit
and your weighing plate.
On the installation site observe the following:
•
Place the display unit and the weighing plate on a stable, even surface.
•
Avoid extreme heat as well as temperature fluctuation caused by installing
next to a radiator or in the direct sunlight;
•
Protect the display unit and the weighing plate against direct draft from open
windows or doors.
•
Avoid jarring during weighing;
•
Protect the display unit and the weighing plate against high humidity, vapours
and dust.
•
Do not expose the display unit to extreme dampness for longer periods of
time. Non-permitted condensation (condensation of air humidity on the
appliance) may occur if a cold appliance is taken to a considerably warmer
environment. In this case, acclimatize the disconnected appliance for ca. 2
hours at room temperature.
•
Avoid static charge of goods to be weighed or weighing container.
Major display deviations (incorrect weighing results) may be experienced should
electromagnetic fields (e.g. due to mobile phones or radio equipment), static
electricity accumulations or instable power supply occur. Change location or remove
source of interference.
6.2 Unpacking and placing
Take the display unit carefully out of its packaging, remove the plastic jacket and
install it at the designated work space.
Mount the display unit in a way that facilitates operation and where it is easy to see.
6.3 Scope of delivery / serial accessories:
•
Display Unit
•
Mains adapter
•
Support base incl. wall bracket
•
Operating instructions