KERN 1500-2M, Руководство по эксплуатации, Страница: 12 / 14

EW-BA-defsi-0620 27
10 General program settings
The balance leaves the factory with the factory settings being set. This is the
standard configuration of the balance. It is marked by a *.
It can be altered as follows:
Press the F key for about 4 seconds until Func appears on the display.
While releasing the key, 1. B.0. 0 appears on the display.
By pressing the F key several times, the single functions are accessed.
By pressing the Tare key several times, the individual setting within the single
functions can be altered.
To accept and quit the program mode, press the S key.
The following changes are possible:
F Tare
Graphic weighing display 1. b0G 0
1*
Balance display is turned
off.
Balance display is turned
on.
Auto Zero 3. A.0 0
1*
deactivated
activated
Automatic shut-down
(Accu only) 4. A.P. 0
1*
deactivated
Balance is shut down after
3 minutes when not in use.
Vibration filters 5. r.E. 1
2*
3 Sensitive and fast
Medium
Insensitive, but slow
Data transmission
(output format)
only with built-in serial data
interface (as option) 6. o.c.
0
1
2
3
4
5
6
7*
No data transmission
Continuous serial data transmission
Continuous serial data transmission at
stable balance display
Data transmission after pressing of Print
Automatic output at balance load, new
output only after taking the weight down
and applying a new load.
One output at stable balance display
One output at random stabilisation, not
documented
One output after pressing of Print at
stable balance